Degassing Equipment
AN EQUIPMENT FOR THE DEGASSING OF MOl TEN AlUMINIUM AllOYS
It is used in a fixed position to treat the metal contained in transfer ladles.
The machine is equipped with a rotating graphite tool (Iance), composed by a shaft and a rotor, through which the inert gas (nitrogen or argon) is blown into the melt, in the form of small bubbles. In this way it is possible to eliminate the hydrogen dissolved in the alloy.
In addition, the same treatment allows the removal of the non-metallic inclusions present in the alloy, which are dragged by the gas bubbles toward the surface by effect of flotation.
AN EQUIPMENT FOR THE DEGASSING OF MOl TEN AlUMINIUM AllOYS
It is used to treat the metal contained in transfer ladles and in melting/holding crucible furnaces. It is displaced by means of a forklift truck or a crane. The machine is equipped with a rotating graphite tool (Iance), composed by a shaft and a rotor, through which the inert gas (nitrogen or argon) is blown into the melt, in the form of small bubbles. In this way it is possible to eliminate the hydrogen dissolved in the alloy. In addition, the same treatment allows the removal of the non-metallic inclusions present in the alloy, which are dragged by the gas bubbles toward the surface by effect of flotation.
It is used in a fixed position to treat the metal contained in transfer ladles.
The machine is equipped with a rotating graphite tool (Iance), composed by a shaft and a rotor, through which the inert gas (nitrogen or argon) is blown into the melt, in the form of small bubbles. In this way it is possible to eliminate the hydrogen dissolved in the alloy.
In addition, the same treatment allows the removal of the non-metallic inclusions present in the alloy, which are dragged by the gas bubbles toward the surface by effect of flotation.
AN EQUIPMENT FOR THE DEGASSING OF MOl TEN AlUMINIUM AllOYS
It is used to treat the metal contained in transfer ladles and in melting/holding crucible furnaces. It is displaced by means of a forklift truck or a crane. The machine is equipped with a rotating graphite tool (Iance), composed by a shaft and a rotor, through which the inert gas (nitrogen or argon) is blown into the melt, in the form of small bubbles. In this way it is possible to eliminate the hydrogen dissolved in the alloy. In addition, the same treatment allows the removal of the non-metallic inclusions present in the alloy, which are dragged by the gas bubbles toward the surface by effect of flotation.
Schede Prodotto